If the electromagnet coil temperature on the high side or burnt coil may be between electromagnetic and armature interval is too large, the coil is easy to burn or adapt Yu Quanbo vibration electromagnet when used for half wave power supply will be temperature on the high side.
When the vibration plate after turning on the power supply is not vibration, if is conveying speed can not meet the requirements to pay attention to;Check whether fastening elastic element of screw loosening;Spring is broken;Electromagnetic gap is too big, the corresponding normal clearance of small vibration disc magnet and armature spacing within 0.5 MM to 1.2 MM.Core and armature face parallelism is not greater than 0.02 MM, not to check whether electric controller fuse fusing, electrical components are loose, the plug socket is bad contact.
Condition of vibration, vibration plate after turning on the power supply is not, to check whether electric controller fuse fusing, electrical components are loose, the plug socket is bad contact.
Condition 2 vibration plate factory remind you vibration plate electromagnet coil temperature on the high side or burnt coil there are two main reasons:
A large space between, vibration plate between electromagnetic and armature, coil burned easily.
B, vibration plate adapt Yu Quanbo vibration electromagnet when used for half wave power supply will be temperature on the high side.